220 a

Design name:
W 180 I
Type:
180.010 (with sliding roof: 180.011)
Production period:
03.1954 / 06.1954 - 04.1956
Note on production period:
production start-up pre-production series / standard production - end of production

Frame design:
floor assembly / steel unit body
Front-wheel suspension:
double wishbone
Rear-wheel suspension:
single-joint swing axle
Front springs:
coil springs, torsion bar stabiliser
Rear springs:
coil springs
Shock absorber front/rear:
telescopic shock absorbers
Steering:
recirculating-ball steering
Brake system (foot brake):
hydraulic, from 09.1955 with vacuum booster, acting on front- and rear wheels; four-wheel drum brakes
Parking brake (hand brake):
mechanical, acting on rear wheels
Wheels:
sheet-steel disc wheels
Wheel rims:
drop-centre rim 5 K x 13
Tires:
6,70-13
Driven wheels:
rear wheels
Drivetrain:
divided cardan shaft

Gearing:
4-speed manual transmission
Availibility:
as standard (1st version)
Shifting:
steering-column shift lever
Clutch:
dry single-disc clutch
Transmission type:
change-speed gear
Gear ratios:
I. 3.40; II. 2.32; III. 1.52; IV. 1.0; R. 3.29
Final drive ratio:
4.11
Maximum speed:
150 km/h
Acceleration 0-100 km/h:
19 s
Fuel consumption:
9.8 l
by Guideline:
DIN 70030: consumption, determined at 3/4 of top-speed (not more than 110 km/h), plus 10 %

Gearing:
4-speed manual transmission
Availibility:
as standard (2nd version)
Shifting:
steering-column shift lever
Clutch:
dry single-disc clutch
Transmission type:
change-speed gear
Gear ratios:
I. 3.52; II. 2.32; III. 1.52; IV. 1.0; R. 3.29
Final drive ratio:
4.10
Maximum speed:
150 km/h
Acceleration 0-100 km/h:
19 s
Fuel consumption:
9.8 l
by Guideline:
DIN 70030: consumption, determined at 3/4 of top-speed (not more than 110 km/h), plus 10 %

Wheelbase:
2820 mm
Front / rear track:
1430 / 1470 mm
Length:
4715 mm
Width:
1740 mm
Height:
1560 mm
Kerb weight:
1280 kg
by Guideline:
DIN 70020 (ready to drive, including fuel, spare wheel and tool kit)
Gross weight:
1730 kg