ML 350, 2009 - 2011 (only as export model for North America)

  • Design name
    W 164 E 35 4x2
  • Type
    164.156
  • Production period
    06.2008 / 07.2009 - 06.2011
  • Note on production period
    production start-up pre-production series / standard production - end of production
  • Structure
    SUV (Sport Utility Vehicle)
  • Number of doors
    5
  • Combustion principle
    four-stroke petrol engine
  • Exhaust-gas treatment
    catalytic converter
  • Arrangement
    front
  • Installation direction
    longitudinally; over axle
  • Engine designation / type
    M 272 E 35 / 272.967
  • Number of cylinders / arrangement
    6 / 90° V
  • Bore
    92.9 mm
  • Stroke
    86.0 mm
  • Displacement
    3498 cc
  • Compression ratio
    10.7
  • Rated power
    200 kW / 272 DIN/hp at 6000 rpm
  • Nominal torque
    350 Nm at 2400 - 5000 rpm
  • Number of valves per cylinder
    4
  • Valve operation
    2 overhead camshafts per cylinder bank (variably adjustable)
  • Camshaft drive
    intake camshafts via duplex roller chain, outlet camshafts via gearwheel engagement with intake camshafts
  • Injection system (location)
    intake duct
  • Injection pump / injection system (type)
    microprocessor-controlled injection system with hot-film air-mass measurement
  • Injection pump (type)
    electric delivery pump
  • Coolant / filling quantity with heating
    9.5 l
  • Oil change quantity (with filter)
    8.0 l
  • On-board power supply voltage
    12 v
  • Generator
    three-phase AC
  • Ignition system
    electronic mapped ignition
  • Fuel tank capacity/of which reserve
    95 / 13.0 l
  • Fuel tank (location)
    in front of rear axle
  • Front-wheel suspension (type)
    independent suspension
  • Front axle
    double-wishbone front axle
  • Rear-wheel suspension (type)
    independent suspension
  • Rear axle
    four-link suspension
  • Suspension front / rear
    coil springs, single-tube gas pressure shock absorbers, torsion bar / coil springs, single-tube gas pressure shock absorbers, torsion bar
  • Steering (type)
    rack-and-pinion
  • Steering assistance
    hydraulically assisted, speed-dependent
  • Brakes front
    discs, internally ventilated
  • Rear brakes
    discs, solid
  • Front brake caliper
    sliding caliper
  • Rear brake caliper
    sliding caliper
  • Disc or drum diameter front
    330 mm
  • Disc or drum diameter rear
    330 mm
  • Parking brake (actuation)
    mechanically (foot-operated)
  • Front rims
    8,0 x 19
  • Rear rims
    8,0 x 19
  • Front tyres
    255/50 R 19
  • Rear tyres
    255/50 R 19
  • Drive
    rear wheel drive
  • Transmission
    automatic
  • Gearbox type designation
    7G-TRONIC
  • Availability
    as standard
  • Clutch
    hydraulic torque converter with lock-up clutch (governed)
  • Gearbox design
    planetary gear group
  • Transmission control
    electrohydraulic
  • Forward gears (total)
    7
  • Gear ratio
    I. 4.38; II. 2.86; III. 1.92; IV. 1.37; V. 1.00; VI. 0.82; VII. 0.73; R. 3.42
  • Axle drive ratio
    3,90
  • Maximum speed
    209 km/h (130 mph - electronically limited)
  • Acceleration 0-100 kpm
    7.9 s (0 - 60 mph)
  • Wheelbase
    2915 mm
  • Front track gauge
    1626 mm
  • Rear track gauge
    1628 mm
  • Vehicle length
    4781 mm
  • Vehicle width
    1938 mm
  • Vehicle height
    1815 mm
  • Turning circle diameter
    11.60 m
  • Unladen weight (according to the respectively valid measurement or calculation methods)
    2100 kg
  • Units produced
    18,109
Loading