PKW4172 "Stroke Eight" saloons, Types 200 D - 280 E (114, 115 series), 1973 - 1976

"Stroke Eight" saloons, Types 200 D - 280 E (114, 115 series), 1973 - 1976

In September 1973, the whole 114/115 series underwent extensive model revision; countless details, which had been introduced into the SL and SLC Types respectively, and also in the S-Class now were incorporated into the models of the less prestigious product line, improving the general safety concept. To name but a few: exterior rear mirrors, which could be adjusted from inside the car, dirt repelling decorative trims at the A-pillars, which kept the side windows clean even in poor weather, profiled, soil-repellent taillights as well as a roof rail at the rear window. The four-spoke security steering wheel, which was a familiar feature of product lines 107 and 116, had been integrated into serial production of the "Stroke Eight" types half a year prior to model revision. From March 1973, head rests and automatic safety belts became part of the serial equipment of 114/115 series models.

The improved models were also up-dated externally and adapted to the appearance of the S-Class. The radiator grill became lower and wider, the swivel windows disappeared, the front number plate was placed on, instead of under, the bumper and the boot handle was altered. The models 250 to 280 E, like the coupés, no longer had the double bumpers at the front and only the 280 and the 280 E still had the longer rear bumper.

As part of the facelift carried out in August 1973 two new 4-cylinder engines were introduced; the 240 D was now the top Diesel model and the 230.4 replaced the 220. The suffix Ř" in the designation of the new 230 was necessary to avoid confusion with the original 230 model with a 6-cylinder engine, which was still available as the 230.6.

In July 1974 there was a further addition to the range: the 240 D 3.0, which was the first 5-cylinder Diesel-engined car in the world. Its 3-liter engine provided 80 hp - a remarkable performance for a Diesel car in those days.

In January 1976 the 123 series was presented as the successor to the 114/115 series; production had already begun. Production of the "Stroke Eight" models was not ceased immediately, but continued until December 1976, so both series were in production simultaneously for about a year.The model 250 up to the 280 E and the coupés were the exceptions, their production already ended a few months earlier – depending on the model between June and September 1976.In nine years a total of more than 1.9 million of all versions of the W 114/115 series were produced.

Armaturen, Mercedes-Benz Typ 200 D,  Baureihe 114, 115, aus dem Jahre 1973
73329-2
MB Typ 200 D, Baureihe 114,115
Armaturen, Mercedes-Benz Typ 220 D, Baureihe 114,115, aus dem Jahre 1973
73329-6
MB Typ 220 D, Baureihe 114,115
Armaturen, Mercedes-Benz Typ 240 D, Baureihe 114,115, aus dem Jahre 1973
73329-8
MB Typ 240 D, Baureihe 114,115
Armaturen, Mercedes-Benz Typ 200, 1973 bis 1976
73329-11
MB Baureihe 114,115
Armaturen, Mercedes-Benz Typ 230.4, aus den Jahren 1973 bis 1976
73329-14
MB Baureihe 114,115
Armaturen, Mercedes-Benz Typ 230.6, aus den Jahren 1973 bis 1976
73329-17
MB Baureihe 114,115
Mercedes-Benz 280 E
114 series, model-maintained version from 1973
Interior
73329-20
Mercedes-Benz 280 E
Mercedes-Benz Typ 280, modellgepflegte Ausführung aus dem Jahre 1973
73329-21
MB 280
Armaturen, Mercedes-Benz Typ 250, Baureihe 114, 115, aus dem Jahre 1973
73329-23
MB Typ 250, Baureihe 114, 115
Mercedes-Benz 240 D 3.0
Baureihe 114,115 
Armaturen
aus dem Jahre 1974
C15950
Mercedes-Benz 240 D 3.0
Mercedes-Benz "Strich-Acht"-Limousine 240 D 3.0 aus dem Jahre 1974
Das Anlassen des Motors erfolgt beim MB 240 D 3.0 durch drehen des Zündschlüssels in Fahrtstellung. Dadurch wird über ein Relais der Vorglühgang eingeleitet. Eine Sicherheitsschaltung begrenzt die Vorglühzeit auf 2-Minuten.
74189-158
Mercedes-Benz 240 D 3.0
Mercedes-Benz 240 D aus dem Jahre 1973
Armaturen
C12268
Mercedes-Benz 240 D
Loading