PKW4111 "Fintail Mercedes", six-cylinder models (W 111, W 112), 1959 - 1968

"Fintail Mercedes", six-cylinder models (W 111, W 112), 1959 - 1968

In August 1959, a profoundly revised passenger car range was presented. According to the motto "The New Six Cylinder Model - A Class Of Its Own" three completeley reconstructed models appeared as the successors of the fomer six-cylinder models 219, 220 S and 220 SE. Except for some equipment details, the only difference between the new 220 b, 220 Sb and 220 SEb, which internally were allocated to model series 111, were the different types of engines.

All three models had a spacious, elegant car body, distinguished by its salient feature the fintails - a concession to the prevailing fashion, which was heavily influenced by the Americans at the time. It was this characteristic design, which later gave the name to a whole new generation of models. The types mentioned above are today generally referred to as "fintail" models. The new models set the standard for passive safety. For the first time, the new Barényi patent, a sturdy passenger cell and deformation zones at the front and the rear, had been realised. Safety was the guiding principle in the design of the interior; thus the new models were fitted with an upholstered dashboard with flexible and partially recessed instruments and a steering wheel with an upholstered centre-piece; another remarkable feature were new special door locks, which further improved driving safety.

Eight features distinguished the exterior of the 220 b from its two sister models: except for the type labels, the 220 Sb and 220 SEb were identical in appearance; they had an additional chome trim on the right and the left of the radiator grill, a chrome plated air intake grid in front of the wind screen and chrome wheel caps. The differences at the rear of the car were more pronounced: The two models with the letter "S" in the type description had a chrome trim above the rear window, a decorative trim lining the rear edge of the boot lid, bigger taillights with integrated number plate illumination and additional quarter bumpers between the taillights and the rear bumper. The tailfins had decorative chrome trims at the rear end and along the upper edge.

The engines were basically taken from the predecessor models and had only been slightly modified. All three units were fitted with a new valve drive and a steeper camshaft. The powerplant of the 220 b had two carburettors now and the injection engine of the 220 SEb hat been fitted with straight intake pipes. This resulted in a power increase of 4 and 5 hp respectively.

Chassis and brakes were also basically carried over from the preceding Types, the wheel suspension had clearly been worked upon, however. The sub-frame concept, which was introduced at the time of the "ponton" models, had been retained. However, its form had changed - it now consisted of a simple transversal bar with an elastic link to the frame floor at two points. The well-tried single joint cross shaft axle was fitted with a compensating spring, which was horizontally located above the pivot in order to ensure even distribution of axle load. The shock absorber in the front and the rear were situated as close to the wheels as possible which did not only result in a more effective dampening of vibration but also allowed better access.

During the time of production the brakes were modified twice: In April 1962 first the 220 Sb and 220 SEb models were equipped with disk brakes at the front wheels. The same procedure was then applied to the 220 b which was moreover fitted with a power brake that earlier had only been available at an extra cost. In the course of revision all three models were fitted with a divided brake system, which allowed safe braking, even if one brake circuit failed to function.

Like their predecessor models, the three 111 series models were available with the hydraulic automatic clutch "Hydrak", only until the beginning of 1962. A fully-fledged automatic transmission, which had been developed for years until it was fit for serial production, was at first available for the 220 SEb only from April 1961. However, from August 1962 it could be ordered for an additional cost of DM 1,400 for the 220 b and 220 Sb, too. In contrast to the Borg-Warner automatic transmission, which had been used from 1956 in the 300 c and from 1957 in the successor model 300 d, Daimler-Benz' own new construction did not have a torque converter but a hydraulic clutch, which had the advantage that power losses were low. The secondary 4-gear planetary drive consisted of two planetary sets, three multi-disk clutchs and three belt brakes.

In August 1961, another top-class model was presented with the 300 SE. With respect to its exterior and technical concept it closely resembled the 220 SEb model but many technical specialities were included as standard. Basic equipment comprised not only the 4-speed automatic transmission and the newly developed power assisted steering, but also air suspension, used for the first time on a Mercedes-Benz and allowing a combination of sporty handling and maximum ride comfort.

The brakes of this model, with the internal designation W 112, represented another advance: for the first time a standard Mercedes-Benz production car was fitted with a dual-circuit brake system and disk brakes front and rear.

The 3-liter injection engine was based on the tried and tested engine from the 300 d, but now had a light-alloy block and was thus approximately 40 kg lighter. Carburation was still on the principle of intermittent inlet manifold injection using a Bosch injection pump. In January 1964 compression was raised slightly and a larger Bosch injection pump was used resulting in an increase in performance from 160 to 170 hp.

 

The body of the 300 SE was almost identical to that of the 220 SEb, but had more extensive chrome trim. The most prominent distinguishing feature was the chrome strip running from the headlights to the taillights in the side ribbing; additionally, the 300 SE had trims around the wheel arches as well as a broad chrome strip below the doors. The small "300 SE" badges integrated on the C-pillars were less dashy. If desired by the customer, this additional chrome trim could be omitted.

 

At the Geneva Motor Show in March 1963, the long-wheelbase version of the 300 SE was presented, identical to the 300 SE apart from the increase in length of 100 mm. The increase in space was exclusively to the benefit of passengers in the rear with more leg-room and improved access through the wider doors. An internal partition with an electrically operated window was available as an option. Apart from the difference in dimensions , the 300 SE and 300 SE with a long wheel-base were easily distinguishable through one feature: The long version does not have a decorative screen in the C-pillar, since exhaust ventilation is performed differently, the openings are there missing. Both versions, 300 SE and 300 SE long, were now also available with 4-speed manual transmission and a corresponding reduction in price of DM 1,400.

 

Production of the 2.2- and 3-liter models with "fintail" bodies ceased in July/August 1965. The 220 Sb, 220 SEb and 300 SE were replaced by the 250 S, 250 SE and 300 SE, which belonged to a completely new model generation. At the same time the 220 b was replaced by the 230 S. This was in fact a new designation for an "old" model: the 230 S was largely identical to the 220 Sb, but had received a modified engine. By giving the former 2.2-liter engine a wider bore and higher compression, performance could be boosted by 10 hp to 120 hp. The hydro-pneumatic self-levelling suspension of the rear axle, which replaced the former coil spring and kept the body level constant independent from vehicle load capacity, was also new. Apart from the model badge on the boot lid, there was no external difference between the 220 S and the 230 S.

By the time that production of the 230 S was discontinued in January 1968, 41,107 of them had been built, of which 341 were chassis for special bodies. A estate version was produced by the Belgian IMA and was marketed by Daimler-Benz as the 230 S Universal.

Between 1959 and 1968 a total of 344,751 saloons and chassis of model series 111 and 112 were produced at the Sindelfingen plant.

Werbeanzeige Daimler-Benz AG: "Frieden auf der Straße. Es liegt in unserer Hand, es liegt in Ihrer Hand", Mercedes-Benz Typ
1988M2996
Advertising Passenger Cars 1967
Silouette W 111 Limousine
00114259
Silouette W 111 Limousine
Mercedes-Benz S-Klasse der Baureihe 126
Vier Generationen
C29417
Mercedes-Benz S-Klasse
Mercedes-Benz 230 S Universal W 111
body IMA
1966 - 1968
U43994
Mercedes-Benz 230 S Universal
Werk IMA in Malines, 1967
Die Presse, worauf die Spezialteile des Mercedes-Benz Kombiwagens UNIVERSAL geformt werden.
2008DIG29991
Werk IMA in Malines, 1967
IMA plant in Malines, 1967
The body-in-white of the UNIVERSAL is produced on a jig using the same process as for the Mercedes-Benz saloon.
2008DIG29993
IMA plant in Malines, 1967
IMA plant in Malines, 1967
The exit of the 1,000 Mercedes-Benz UNIVERSAL was the occasion of a small celebration, with the main participants in the development and production of the estate car gathered around the company's management.
2008DIG29996
IMA plant in Malines, 1967
Werk IMA in Malines, 1967
Gewisse Karosserieteile, die zu der Mercedes-Benz Limousine gehören, werden zuerst serienweise geändert, ehe sie auf den Kombiwagen UNIVERSAL montiert werden können.
2008DIG29992
Werk IMA in Malines, 1967
Mercedes-Benz 230 S
"Heckflossen-Mercedes" Limousine
1965 - 1968
U45365
Mercedes-Benz 230 S
Mercedes-Benz 230 S
"Heckflossen-Mercedes" Limousine
1965 - 1968
U30879
Mercedes-Benz 230 S
Mercedes-Benz 250 S und 230 S
aus dem Jahre 1965
U31367
Mercedes-Benz 250 S und 230 S
Mercedes-Benz 220 Sb / 220 SEb
"Heckflossen-Mercedes" 
1959 - 1965
U16508
Mercedes-Benz 220 Sb / 220 SEb
Mercedes-Benz 220 Sb
"Heckflossen-Mercedes" 
1959 - 1965
88432
Mercedes-Benz 220 Sb
Mercedes-Benz 230 S
"Heckflossen-Mercedes" 
1965 - 1968
U30881
Mercedes-Benz 230 S
Mercedes-Benz 220 Sb
"Heckflossen-Mercedes" 1959 - 1965
U5646
Mercedes-Benz 220 Sb
Mercedes-Benz 220 b
"Heckflossen-Mercedes" 
1959 - 1965
88426
Mercedes-Benz 220 b
Mercedes-Benz 220 S / 220 SE
"Heckflossen-Mercedes" an der Autobahn Albaufstieg
1959 - 1965
59132-13
Mercedes-Benz 220 S / 220 SE
Mercedes-Benz 220 Sb / 220 SEb
"Heckflossen-Mercedes" 
1959 - 1965
60219-30
Mercedes-Benz 220 Sb / 220 SEb
Mercedes-Benz 220 Sb / 220 SEb, 1959
Oberhalb des Klosters Zwiefalten
59099-15
Mercedes-Benz 220 Sb / 220 SEb
Mercedes-Benz 220 Sb / 220 SEb
"Heckflossen-Mercedes", 1959 - 1965
88441
Mercedes-Benz 220 Sb / 220 SEb
Mercedes-Benz 220 b / 220 Sb / 220 SEb der Baureihe W 111, 1959 - 1965
Eingelenk-Pendelachse mit der über dem Achsantrieb liegenden Ausgleichsfeder und den Schubstreben.
88271
Mercedes-Benz 220 b / 220 Sb / 220 SEb
Mercedes-Benz 220 Sb / 220 SEb, 1959
Im Tal der jungen Donau zwischen Tuttlingen und Sigmaringen.
59099-7
Mercedes-Benz 220 Sb / 220 SEb
Mercedes-Benz 220 b
der Baureihe W 111, 1959 - 1961
88420
Mercedes-Benz 220 b
Mercedes-Benz 220 Sb / 220 SEb, 1959
Im Tal der jungen Donau zwischen Tuttlingen und Sigmaringen.
59099-21
Mercedes-Benz 220 Sb / 220 SEb
Signal speedometer with changing colour (0-50-km/h yellow, from 50-km/h red)
Combination unit of the Mercedes-Benz models 220, 220 S and 220 SE, 1959 - 1965
89164
Mercedes-Benz W 111
Mercedes-Benz 220 Sb
"Heckflossen-Mercedes", 1959 - 1965
88429
Mercedes-Benz 220 Sb
Mercedes-Benz 220 Sb / 220 SEb
der Baureihe W  111, 1959 - 1965
Eingelenk-Pendelachse mit tiefliegendem Drehpunkt und Ausgleichsfeder in Achsmitte.
88252
Mercedes-Benz 220 Sb / 220 SEb
Mercedes-Benz 220 Sb / 220 SEb der Baureihe W 111, 1959 - 1961
Anordnung der Stoßdämpfer, der Schubstreben und der Hauptfedern der Hinterachse.
88253
Mercedes-Benz 220 Sb / 220 SEb
Advertising Mercedes-Benz: "Never has safety looked so elegant", Mercedes-Benz type 220 SE
1988M2494
Advertising Passenger Cars 1964
Werbeanzeige Mercedes-Benz: "Ein neues Programm für alle Wünsche", Mercedes-Benz Typ 180, 180 D, 190, 190 D, 220, 220 S, 220 SE
1988M1607
Advertising Passenger Cars 1959
Werbeanzeige Mercedes-Benz: "Die neuen Sechszylinder eine Klasse für sich", Mercedes-Benz Typ 220, 200 S, 220 SE
1988M1589
Advertising Passenger Cars 1959
Advertising Mercedes-Benz: "Driving becomes a joyful experience - When a car combines liveliness, safety and elegance it ..."
1988M2026
Advertising Passenger Cars 1962
S-Klasse Plakat
2008DIG3846
S-Klasse Plakat
Mercedes-Simplex 60 PS und S-Klasse Baureihe 222
2008DIG33832
Mercedes-Simplex 60 PS und S-Klasse Baureihe 222
Road Grand Prix in Argentina for touring cars taking place from 25th October to 4th November 1962. The Scandinavian ladies Rosquist and Wirth masterfully control speed on unpaved roads in the 220 SE (W 111); it is their ticket to victory.
In the third stage, which goes through the pre-cordilleras, the road has become a gravel-strewn mountain path.
U10890
Road Grand Prix in Argentina
Rollover attempts to ensure the stability of the passenger compartment, since 1954 at the test site in Sindelfingen, with Mercedes-Benz 220 S W 111, built in 1962, which was brought over via a one-sided ramp. The roof posts withstood the impact.
C3898
Rollover attempts
Aufprallversuche im Werk Sindelfingen der Daimler-Benz AG, 1962.
Aufprall eines "Heckflossen-Mercedes" 220 Sb mit einer Geschwindigkeit von 86-km/h auf einen Omnibus.
VS621148
Aufprallversuche im Werk Sindelfingen
Two-point inclined shoulder safety belts in a W 111
96018
Two-point inclined shoulder safety belts
The Mercedes-Benz 220 SE (W 111/112) from 1961 was the world's first coupé with a safety chassis based on the Béla Barényi patent.
06C2553_017
Mercedes-Benz 220 SE
Mercedes-Benz 230 S Universal, IMA body, 1966 to 1968
U43993
Mercedes-Benz 230 S Universal
Loading