200 GE (from 09.1993: G 200) (long wheelbase), 1989 - 1993 (only as export model for Italy)

Combustion principle:
four-stroke petrol engine
Exhaust-gas treatment:
catalytic converter
Arrangement:
front
Installation direction:
longitudinally; over axle
Engine designation / type:
M 102 E 20 / 102.965
Number of cylinders / arrangement:
4 / in-line
Bore:
89.0 mm
Stroke:
80.2 mm
Displacement :
1996 cc
Compression ratio:
9.1
Rated power:
87 kW / 118 DIN/hp at 5200 rpm
Nominal torque:
172 Nm at 3500 rpm
Number of valves per cylinder:
2
Valve operation:
1 overhead camshaft
Camshaft drive:
single roller chain
Injection system (location):
intake duct
Injection pump / injection system (type):
intake manifold injection, mechanically-electronically controlled (Bosch KE-Jetronic)
Injection pump (type):
electric delivery pump
Coolant / filling quantity with heating:
5.0 l
Oil change quantity (with filter):
6.0 l
On-board power supply voltage:
12 v
Battery capacity:
66 Ah
Generator:
three-phase AC / 770 w
Ignition system:
electronic ignition system
Fuel tank capacity/of which reserve:
96 l
Fuel tank (location):
under load compartment floor

Frame design:
box-section ladder-type frame
Front-wheel suspension (type):
rigid axle
Front axle:
2 trailing arms, 1 wishbone (Panhard bar)
Rear-wheel suspension (type):
rigid axle
Rear axle:
2 trailing arms, 1 wishbone (Panhard bar)
Suspension front / rear:
coil springs, supplementary rubber suspension, telescopic shock absorbers, torsion bar stabiliser / coil springs, supplementary rubber suspension, telescopic shock absorbers
Steering (type):
recirculating ball
Steering assistance:
hydraulically assisted
Brakes front:
discs
Rear brakes:
drums
Disc or drum diameter front :
303 mm
Disc or drum diameter rear:
260 mm
Parking brake (actuation):
mechanically (manually operated)
Front rims:
6 J x 16
Rear rims:
6 J x 16
Front tyres:
205 R16 M+S
Rear tyres:
205 R16 M+S
Drive:
permanent four-wheel drive
All-wheel torque distribution front / rear:
50 % front / 50 % rear
Drivetrain:
from the transfer case via cardan shafts to front and rear axle differential; differential locks on transfer case, front and rear axle lockable at the touch of a button
Max. angle of approach/departure:
37,0° / 32,0°
Max. fording depth:
600 mm
Slope climbing ability:
80 %

Wheelbase:
2850 mm
Front track gauge:
1425 mm
Rear track gauge:
1425 mm
Vehicle length:
4635 mm
Vehicle width:
1690 mm
Vehicle height:
1936 mm
Turning circle diameter:
13.24 m
Unladen weight (according to the respectively valid measurement or calculation methods):
2195 kg
Permissible total weight:
2950 kg
Permissible axle load front:
1380 kg
Permissible axle load rear:
1800 kg
Payload:
755 kg
Permissible trailer load unbraked / braked:
750 / 2950 kg