G 500 (special protection model B7), 1999 - 2000

  • Design name
    463 GE 50 B7
  • Type
    463.241 (station wagon)
  • Production period
    1999 - 2000
  • Note on production period
    production start-up standard production - end of production
  • Number of doors
    5
  • Combustion principle
    four-stroke petrol engine
  • Exhaust-gas treatment
    catalytic converter
  • Arrangement
    front
  • Installation direction
    longitudinally; over axle
  • Engine designation / type
    M 113 E 50 / 113.962
  • Number of cylinders / arrangement
    8 / 90° V
  • Bore
    97,0 mm
  • Stroke
    84,0 mm
  • Displacement
    4966 cc
  • Compression ratio
    10.0
  • Rated power
    218 kW / 296 DIN/hp at 5500 rpm
  • Nominal torque
    456 Nm at 2800 - 4000 rpm
  • Number of valves per cylinder
    3
  • Valve operation
    1 overhead camshaft per cylinder bank
  • Camshaft drive
    duplex roller chain
  • Injection system (location)
    intake duct
  • Injection pump / injection system (type)
    microprocessor-controlled injection system with hot-film air-mass measurement
  • Injection pump (type)
    electric delivery pump
  • Coolant / filling quantity with heating
    12.0 l
  • Oil change quantity (with filter)
    8.0 l
  • On-board power supply voltage
    12 v
  • Battery capacity
    74 Ah
  • Generator
    three-phase AC / 1610 w
  • Ignition system
    electronic map-controlled phased twin-spark ignition
  • Fuel tank capacity/of which reserve
    96 l
  • Fuel tank (location)
    under load compartment floor
  • Frame design
    box-section ladder-type frame
  • Front-wheel suspension (type)
    rigid axle
  • Front axle
    2 trailing arms, 1 wishbone (Panhard bar)
  • Rear-wheel suspension (type)
    rigid axle
  • Rear axle
    2 trailing arms, 1 wishbone (Panhard bar)
  • Suspension front / rear
    coil springs, supplementary rubber suspension, telescopic shock absorbers, torsion bar stabiliser / coil springs, supplementary rubber suspension, telescopic shock absorbers
  • Steering (type)
    recirculating ball
  • Steering assistance
    hydraulically assisted
  • Brakes front
    discs, internally ventilated
  • Rear brakes
    drums
  • Disc or drum diameter front
    313 mm
  • Disc or drum diameter rear
    270 mm
  • Parking brake (actuation)
    mechanically (manually operated)
  • Front rims
    7.5 J x 16
  • Rear rims
    7.5 J x 16
  • Front tyres
    265/70 R16
  • Rear tyres
    265/70 R16
  • Drive
    permanent four-wheel drive
  • All-wheel torque distribution front / rear
    50 % front / 50 % rear
  • Drivetrain
    from the transfer case via cardan shafts to front and rear axle differential; differential locks on transfer case, front and rear axle lockable at the touch of a button 
  • Transmission
    automatic
  • Gearbox type designation
    5-speed automatic transmission (electronically controlled)
  • Availability
    as standard
  • Clutch
    hydraulic torque converter with lock-up clutch (governed)
  • Gearbox design
    planetary gear group
  • Transmission control
    hydraulic
  • Forward gears (total)
    5
  • Gear ratio
    I. 3.59; II. 2.19; III. 1.41; IV. 1.0; V. 0.83; R. 3.16
  • Axle drive ratio
    4.38 (front/rear)
  • Transmission ration transfer case (road)
    0.87
  • Transmission ration transfer case (off-road)
    2.16
  • Maximum speed
    max. permissible speed dependent on tyres: 160 km/h
  • Wheelbase
    2850 mm
  • Front track gauge
    1555 mm
  • Rear track gauge
    1555 mm
  • Vehicle length
    4680 mm
  • Vehicle width
    1760 mm
  • Vehicle height
    1936 mm
  • Turning circle diameter
    13.26 mm
  • Unladen weight (according to the respectively valid measurement or calculation methods)
    3850 kg
  • Permissible total weight
    4200 kg
  • Permissible axle load front
    1850 kg
  • Permissible axle load rear
    2350 kg
  • Payload
    350 kg
  • Units produced
    not separately documented
  • Prices
    no list price
Loading